TRIPLE BEAM BALANCE
Cat No. VE/BLA/00010 A A single pan, low from beam that will weigh upto 2610 gm when used with supplementary masses. The balance has three notched weighing beams with center indicating sliding masses, giving total weighing capacity of 610gm. Additional … Click Here And Read Rest Below
TRIPLE BEAM BALANCE
Cat No. VE/BLA/00010 A single pan, low from beam that will weigh upto 2610 gm when used with supplementary masses. The balance has three notched weighing beams with center indicating sliding masses, giving total weighing capacity of 610gm. Additional masses … Click Here And Read Rest Below
LEVER (LETTER) BALANCE
Cat No.VE/BAL/00009 The balance frame is of aluminium casting having three point base with a leveling screws.The dual range are scale 0-250 gms x 1gm division and 0-1 Kg x 10gms. With removable pan. The changeover is effected by a … Click Here And Read Rest Below
FOUR BEAM (SUSPENDED PAN) BALANCE
Cat No.VE/BAL/00008 A 4 beam balance with a suspended pan. Weighing capacity 311g.Sensitivity 0.01g. Height of stirrup approx 190mm. Beams notched. Four beams each provided with a slider, and graduated 0-200g x 100g, 0-100g x 10g, 0-10g x 1 g … Click Here And Read Rest Below
Cat No. VE/BAL/00007 Features: Auto shut off. Auto calibration. Auto zero tracking. Auto backlight. Low battery indication. Kg/g/oz conversion. Large LCD (6 digits 15mm height). Large Square weighing pan. Net weight/stability indication. 1/2000, 1/5000 & 1/15000 division available. Cat. No. … Click Here And Read Rest Below
CAT. No. VE/PHY/00096
Optical Bench 1 Meter, Wooden: Comprising a wooden base board 1100mm x 115 mm with one meter scale divided in mm & figured at every cm fixed along the front edge & complete with following accessories: Two white faced object & receiving screen, one plane mirror 150 x 100 mm, 4 lens holder V shaped, one needle mounted vertically in a short wooden rod in the centre of a wooden base. The optical centre height of all the components is 100 mm above the baseboard.
Optical Bench 1.5 Meters: Comprising a wooden base board 1600mm x 140 mm with a 1.5 meter scale divided in mm plus six sliding moulded metallic bases 100 x 50 mm each with engraved line, brass pillar with screw for locking. Accessories: one 240V white lamp with lamp house; 1 metal object white screen 75mm diameter with gauze; 1 metal object white receiving screen 100 x 75 mm; 1 needle mounted in rod 6 mm; 1 plane mirror 100 x 75 mm. All the accessories mounted on a 6mm brass rod which fits in a stand giving an optical height of approx. 125 mm above the base board.
Optical Bench 1 Meter: One meter long, for advanced research work; consists of two rods, one stainless steel & one chrome plated steel. The stainless rod is divided in mm. These are supported on heavy cast iron feet with leveling screws. Four specially designed metal sliders having a fine index mark enables reading to be taken on scale with ease & accuracy. The sliders are machined metal so they slide accurately & smoothly on the bed. Two of the sliders have transverse slow motion adjustment. Complete with 6 accessories ( 2 lens holders, 2 optical pins, 1 candle holder, & 1 screen ground glass).
Optical Bench, 1.5 Meters: Same as VE/PHY/00096 C but 1.5 meters long.