• TRIPLE BEAM BALANCE

    TRIPLE BEAM BALANCE

    Cat No. VE/BLA/00010 A A single pan, low from beam that will weigh upto 2610 gm when used with supplementary masses. The balance has three notched weighing beams with center indicating sliding masses, giving total weighing capacity of 610gm. Additional … Click Here And Read Rest Below

  • TRIPLE BEAM BALANCE

    TRIPLE BEAM BALANCE

    Cat No. VE/BLA/00010 A single pan, low from beam that will weigh upto 2610 gm when used with supplementary masses. The balance has three notched weighing beams with center indicating sliding masses, giving total weighing capacity of 610gm. Additional masses … Click Here And Read Rest Below

  • LEVER (LETTER) BALANCE

    LEVER (LETTER) BALANCE

    Cat No.VE/BAL/00009 The balance frame is of aluminium casting having three point base with a leveling screws.The dual range are scale 0-250 gms x 1gm division and 0-1 Kg x 10gms. With removable pan. The changeover is effected by a … Click Here And Read Rest Below

  • FOUR BEAM (SUSPENDED PAN) BALANCE

    FOUR BEAM (SUSPENDED PAN) BALANCE

    Cat No.VE/BAL/00008 A 4 beam balance with a suspended pan. Weighing capacity 311g.Sensitivity 0.01g. Height of stirrup approx 190mm. Beams notched. Four beams each provided with a slider, and graduated 0-200g x 100g, 0-100g x 10g, 0-10g x 1 g … Click Here And Read Rest Below

  • ELECTRONIC BALANCE

    ELECTRONIC BALANCE

    Cat No. VE/BAL/00007 Features: Auto shut off. Auto calibration. Auto zero tracking. Auto backlight. Low battery indication. Kg/g/oz conversion. Large LCD (6 digits 15mm height). Large Square weighing pan. Net weight/stability indication. 1/2000, 1/5000 & 1/15000 division available. Cat. No. … Click Here And Read Rest Below

YOUNG’S MODULUS APPARATUS
YOUNG'S MODULUS APPARATUS
YOUNG’S MODULUS APPARATUS

CAT. No. VE/PHY/00153

VE/PHY/00153 A

Searle’s pattern: The instrument consisting of two frames connected by a link. The frames are fitted with self cenring chucks. An accurately graduated micrometer screw to read to 01 mm is fitted on one frame. One end of a sensitive spirit level is pivoted to one of the frame, the other end rests on the poins of a micrometer screw fitted in the other frame. The bubble of the level is adjusted to its zero mark and the reading of the micrometer observed. The load is then applied and by turning the micrometer screw the bubble is again adjusted to zero. The reading is observed and the difference between the reading gives the extension of the wire. Complete with chucks, ceiling attachment and tension weight. With case.

VE/PHY/00153 A

Simple form but efficient. Consist of a brass scale 10 cms. long and vernier to read 1/10mm with V slides clamps, guides for wire ceiling attachment and tension weight.

  1. Product Query

Coporate Offices