• TRIPLE BEAM BALANCE

    TRIPLE BEAM BALANCE

    Cat No. VE/BLA/00010 A A single pan, low from beam that will weigh upto 2610 gm when used with supplementary masses. The balance has three notched weighing beams with center indicating sliding masses, giving total weighing capacity of 610gm. Additional … Click Here And Read Rest Below

  • TRIPLE BEAM BALANCE

    TRIPLE BEAM BALANCE

    Cat No. VE/BLA/00010 A single pan, low from beam that will weigh upto 2610 gm when used with supplementary masses. The balance has three notched weighing beams with center indicating sliding masses, giving total weighing capacity of 610gm. Additional masses … Click Here And Read Rest Below

  • LEVER (LETTER) BALANCE

    LEVER (LETTER) BALANCE

    Cat No.VE/BAL/00009 The balance frame is of aluminium casting having three point base with a leveling screws.The dual range are scale 0-250 gms x 1gm division and 0-1 Kg x 10gms. With removable pan. The changeover is effected by a … Click Here And Read Rest Below

  • FOUR BEAM (SUSPENDED PAN) BALANCE

    FOUR BEAM (SUSPENDED PAN) BALANCE

    Cat No.VE/BAL/00008 A 4 beam balance with a suspended pan. Weighing capacity 311g.Sensitivity 0.01g. Height of stirrup approx 190mm. Beams notched. Four beams each provided with a slider, and graduated 0-200g x 100g, 0-100g x 10g, 0-10g x 1 g … Click Here And Read Rest Below

  • ELECTRONIC BALANCE

    ELECTRONIC BALANCE

    Cat No. VE/BAL/00007 Features: Auto shut off. Auto calibration. Auto zero tracking. Auto backlight. Low battery indication. Kg/g/oz conversion. Large LCD (6 digits 15mm height). Large Square weighing pan. Net weight/stability indication. 1/2000, 1/5000 & 1/15000 division available. Cat. No. … Click Here And Read Rest Below

WATER BATH RECTANGULAR (THERMOSTATICALLY CONTROLLED)
WATER BATH RECTANGULAR
WATER BATH RECTANGULAR (THERMOSTATICALLY CONTROLLED)

CAT NO: – VE/LAB/00003

CONSTRUCTION

VITCO water bath are double walled inside made of heavy gauage brass/coppers heavenly tinned from inside and outer body of mild steel

The gap of 1”between two wall is filled with glass wool as insulation to protect loss heat. The cover of the bath is made of brass/copper with concentricing of 75mm dia, which are nicely chromium plated.

HEATERS

The bath has U shaped immersion type heater, which is extended to the full length of the bath in order to maintain equal and uniform temperature.

TEMPERATURE CONTROL

The temperature is controlled up to 100 °c with an accuracy of + 0.5 °c.

FINISH

The bath is painted in blued white stoved enamel paint with a colored panel.

NORMAL EQUIPMENTS

The panel has an on off switch . Two light and a thermostat.It is also provided with a drain cork plug and cord to work on 220/30 Volts AC.

12” x 10” x 4”  with 6 holes of 3” dia

12” x 12” x 4”   “     9 holes    “3”     “

16” x 12” x 4”   “   12 holes    “3”     “

  1. Product Query

Coporate Offices