• TRIPLE BEAM BALANCE

    TRIPLE BEAM BALANCE

    Cat No. VE/BLA/00010 A A single pan, low from beam that will weigh upto 2610 gm when used with supplementary masses. The balance has three notched weighing beams with center indicating sliding masses, giving total weighing capacity of 610gm. Additional … Click Here And Read Rest Below

  • TRIPLE BEAM BALANCE

    TRIPLE BEAM BALANCE

    Cat No. VE/BLA/00010 A single pan, low from beam that will weigh upto 2610 gm when used with supplementary masses. The balance has three notched weighing beams with center indicating sliding masses, giving total weighing capacity of 610gm. Additional masses … Click Here And Read Rest Below

  • LEVER (LETTER) BALANCE

    LEVER (LETTER) BALANCE

    Cat No.VE/BAL/00009 The balance frame is of aluminium casting having three point base with a leveling screws.The dual range are scale 0-250 gms x 1gm division and 0-1 Kg x 10gms. With removable pan. The changeover is effected by a … Click Here And Read Rest Below

  • FOUR BEAM (SUSPENDED PAN) BALANCE

    FOUR BEAM (SUSPENDED PAN) BALANCE

    Cat No.VE/BAL/00008 A 4 beam balance with a suspended pan. Weighing capacity 311g.Sensitivity 0.01g. Height of stirrup approx 190mm. Beams notched. Four beams each provided with a slider, and graduated 0-200g x 100g, 0-100g x 10g, 0-10g x 1 g … Click Here And Read Rest Below

  • ELECTRONIC BALANCE

    ELECTRONIC BALANCE

    Cat No. VE/BAL/00007 Features: Auto shut off. Auto calibration. Auto zero tracking. Auto backlight. Low battery indication. Kg/g/oz conversion. Large LCD (6 digits 15mm height). Large Square weighing pan. Net weight/stability indication. 1/2000, 1/5000 & 1/15000 division available. Cat. No. … Click Here And Read Rest Below

SURFACE TENSION BALANCE SEARL’S
SURFACE TENSION BALANCE SEAL'S
SURFACE TENSION BALANCE SEARL’S

CAT. No. VE/PHY/00148

Approximately 275 mm length with cast metal bridge mounted on tripod stand adjustable for height & having a levelling knurled head screw fitted on one foot. The bridge has raised end pieces to which are screwed small metal blocks securing either end of a plated steel torsion wire. One block disc slotted to facilitate adjustment for torsion of the wire by means of screw passing through the end piece. At the centre of the wire, a small clamp is fitted carrying a light weight metal pointer with an adjustable counterpoise. From a notch near the tip of the pointer is suspended a small weight pan with a hook fitted to its underside, to hold either wire frame 80 x 25 mm or a metal clip carrying a glass microscope slide 75 x 25 x 1.5 mm. The tip of the pointer moves over a graduated vertical scale complete with set of weights 1 mgm to 1 gm.

  1. Product Query

Coporate Offices