• TRIPLE BEAM BALANCE

    TRIPLE BEAM BALANCE

    Cat No. VE/BLA/00010 A A single pan, low from beam that will weigh upto 2610 gm when used with supplementary masses. The balance has three notched weighing beams with center indicating sliding masses, giving total weighing capacity of 610gm. Additional … Click Here And Read Rest Below

  • TRIPLE BEAM BALANCE

    TRIPLE BEAM BALANCE

    Cat No. VE/BLA/00010 A single pan, low from beam that will weigh upto 2610 gm when used with supplementary masses. The balance has three notched weighing beams with center indicating sliding masses, giving total weighing capacity of 610gm. Additional masses … Click Here And Read Rest Below

  • LEVER (LETTER) BALANCE

    LEVER (LETTER) BALANCE

    Cat No.VE/BAL/00009 The balance frame is of aluminium casting having three point base with a leveling screws.The dual range are scale 0-250 gms x 1gm division and 0-1 Kg x 10gms. With removable pan. The changeover is effected by a … Click Here And Read Rest Below

  • FOUR BEAM (SUSPENDED PAN) BALANCE

    FOUR BEAM (SUSPENDED PAN) BALANCE

    Cat No.VE/BAL/00008 A 4 beam balance with a suspended pan. Weighing capacity 311g.Sensitivity 0.01g. Height of stirrup approx 190mm. Beams notched. Four beams each provided with a slider, and graduated 0-200g x 100g, 0-100g x 10g, 0-10g x 1 g … Click Here And Read Rest Below

  • ELECTRONIC BALANCE

    ELECTRONIC BALANCE

    Cat No. VE/BAL/00007 Features: Auto shut off. Auto calibration. Auto zero tracking. Auto backlight. Low battery indication. Kg/g/oz conversion. Large LCD (6 digits 15mm height). Large Square weighing pan. Net weight/stability indication. 1/2000, 1/5000 & 1/15000 division available. Cat. No. … Click Here And Read Rest Below

SIMPLE HARMONIC MOTION DEMONSTRATION MODEL
SIMPLE HARMONIC MOTION DEMONSTRATION MODEL

CAT. No. VE/PHY/00160

Demonstrates the relationship between simple harmonic motion & uniform motion round a circle. The unit consists of a black metal disc approx. 200 mm in dia supported on clear plastic base white marker 13 mm dia may be rotated just inside the periphery of the disc by means of a handle at the rear of the disc. Similar marker moves along a slot across the diameter of the disc, always in phase with the peripheral marker, performing simple harmonic motion when the handle is turned at a uniform speed. May be used with the slot horizontal or vertical.

  1. Product Query

Coporate Offices