• TRIPLE BEAM BALANCE

    TRIPLE BEAM BALANCE

    Cat No. VE/BLA/00010 A A single pan, low from beam that will weigh upto 2610 gm when used with supplementary masses. The balance has three notched weighing beams with center indicating sliding masses, giving total weighing capacity of 610gm. Additional … Click Here And Read Rest Below

  • TRIPLE BEAM BALANCE

    TRIPLE BEAM BALANCE

    Cat No. VE/BLA/00010 A single pan, low from beam that will weigh upto 2610 gm when used with supplementary masses. The balance has three notched weighing beams with center indicating sliding masses, giving total weighing capacity of 610gm. Additional masses … Click Here And Read Rest Below

  • LEVER (LETTER) BALANCE

    LEVER (LETTER) BALANCE

    Cat No.VE/BAL/00009 The balance frame is of aluminium casting having three point base with a leveling screws.The dual range are scale 0-250 gms x 1gm division and 0-1 Kg x 10gms. With removable pan. The changeover is effected by a … Click Here And Read Rest Below

  • FOUR BEAM (SUSPENDED PAN) BALANCE

    FOUR BEAM (SUSPENDED PAN) BALANCE

    Cat No.VE/BAL/00008 A 4 beam balance with a suspended pan. Weighing capacity 311g.Sensitivity 0.01g. Height of stirrup approx 190mm. Beams notched. Four beams each provided with a slider, and graduated 0-200g x 100g, 0-100g x 10g, 0-10g x 1 g … Click Here And Read Rest Below

  • ELECTRONIC BALANCE

    ELECTRONIC BALANCE

    Cat No. VE/BAL/00007 Features: Auto shut off. Auto calibration. Auto zero tracking. Auto backlight. Low battery indication. Kg/g/oz conversion. Large LCD (6 digits 15mm height). Large Square weighing pan. Net weight/stability indication. 1/2000, 1/5000 & 1/15000 division available. Cat. No. … Click Here And Read Rest Below

SIGNAL GENERATOR
SIGNAL GENERATOR
SIGNAL GENERATOR

CAT NO. VE/PHY/00032

VE/PHY/00032 A

1 Hz to 100 KHz:  Sine, square and triangular waveform short circuit protection. High input impedance amplifier. Output 0-20 volts pk-pk at 50 ohms.
A high power, robust, wide range signal generator providing sine, square and triangular waveforms. An instrument designed for a wide range of applications, with clear front panel layout for easy use.

Technical Data

Frequency range 1 Hz to 100 KHz in five decades and read on linearly calibrated scale.

Accuracy ± 2% on all ranges.

Output sine, square and triangular waveforms.
Amplitude control continuously variable from zero to maximum output.
Attenuator 0.2, 2, 20 Volts.

VE/PHY/00032 B

Signal Generator and Amplifier:  A good quality high performance frequency generator with integral power amplifier.

Output Frequency Range Output: 1 Hz to 110 KHz. 5 switched ranges. Sine, Triangular and Square waveforms.
Outputs : High impedance with 600 ohms constant impedance attenuator.
Low Impedance: Both outputs paired colour coded 4 mm sockets at 19 mm pitch. power 6 W rms into 8 ohms at low impedance output.
Maximum Output: Voltage 14 volts pk-pk typical at high impedance output. Rise time of square wave 1 s (both outputs). All outputs are fully floating and short circuit proof.
Input: Pair of colour coded 4 mm sockets and coaxial socket. Amplifier input impedance 1 Mohm.
Attenuator: 0-20 dB with constant impedance at 600 ohms output.
Controls: Mains switch on amplitude control.
Frequency Control Dial: Range selection 5 positions switch. Attenuator three position switch.
Electrical Protection: Internal 20 mm fuse.

  1. Product Query

Coporate Offices