• TRIPLE BEAM BALANCE

    TRIPLE BEAM BALANCE

    Cat No. VE/BLA/00010 A A single pan, low from beam that will weigh upto 2610 gm when used with supplementary masses. The balance has three notched weighing beams with center indicating sliding masses, giving total weighing capacity of 610gm. Additional … Click Here And Read Rest Below

  • TRIPLE BEAM BALANCE

    TRIPLE BEAM BALANCE

    Cat No. VE/BLA/00010 A single pan, low from beam that will weigh upto 2610 gm when used with supplementary masses. The balance has three notched weighing beams with center indicating sliding masses, giving total weighing capacity of 610gm. Additional masses … Click Here And Read Rest Below

  • LEVER (LETTER) BALANCE

    LEVER (LETTER) BALANCE

    Cat No.VE/BAL/00009 The balance frame is of aluminium casting having three point base with a leveling screws.The dual range are scale 0-250 gms x 1gm division and 0-1 Kg x 10gms. With removable pan. The changeover is effected by a … Click Here And Read Rest Below

  • FOUR BEAM (SUSPENDED PAN) BALANCE

    FOUR BEAM (SUSPENDED PAN) BALANCE

    Cat No.VE/BAL/00008 A 4 beam balance with a suspended pan. Weighing capacity 311g.Sensitivity 0.01g. Height of stirrup approx 190mm. Beams notched. Four beams each provided with a slider, and graduated 0-200g x 100g, 0-100g x 10g, 0-10g x 1 g … Click Here And Read Rest Below

  • ELECTRONIC BALANCE

    ELECTRONIC BALANCE

    Cat No. VE/BAL/00007 Features: Auto shut off. Auto calibration. Auto zero tracking. Auto backlight. Low battery indication. Kg/g/oz conversion. Large LCD (6 digits 15mm height). Large Square weighing pan. Net weight/stability indication. 1/2000, 1/5000 & 1/15000 division available. Cat. No. … Click Here And Read Rest Below

PIPETTE STAND (VERTICAL)
PIPETTE STAND VERTICAL
PIPETTE STAND (VERTICAL)
CAT NO.VE/PLA/00030

This is a stable non-corrosive, detachable stand, which can hold 28 pipette with maximum dia 14mm.The heavy base measures 225 mm in diameter in a polyproplyene coated square rod measuring 375mm in length is screwed into the base .The top disc that can be fixed on the rod has a hole for holding pipettes while the lower lines has pilot holes where the pipette tips rest and liquid drains out to the base. These discs can be adjusted on the rod according to the length of the pipette. The arrows provided on the discs should be kept parallel to ensure that corresponding holes are being centered.

Cat no.                             Capacity

VE/PLA/00030 A           For 28 Pipettes

  1. Product Query

Coporate Offices