• TRIPLE BEAM BALANCE

    TRIPLE BEAM BALANCE

    Cat No. VE/BLA/00010 A A single pan, low from beam that will weigh upto 2610 gm when used with supplementary masses. The balance has three notched weighing beams with center indicating sliding masses, giving total weighing capacity of 610gm. Additional … Click Here And Read Rest Below

  • TRIPLE BEAM BALANCE

    TRIPLE BEAM BALANCE

    Cat No. VE/BLA/00010 A single pan, low from beam that will weigh upto 2610 gm when used with supplementary masses. The balance has three notched weighing beams with center indicating sliding masses, giving total weighing capacity of 610gm. Additional masses … Click Here And Read Rest Below

  • LEVER (LETTER) BALANCE

    LEVER (LETTER) BALANCE

    Cat No.VE/BAL/00009 The balance frame is of aluminium casting having three point base with a leveling screws.The dual range are scale 0-250 gms x 1gm division and 0-1 Kg x 10gms. With removable pan. The changeover is effected by a … Click Here And Read Rest Below

  • FOUR BEAM (SUSPENDED PAN) BALANCE

    FOUR BEAM (SUSPENDED PAN) BALANCE

    Cat No.VE/BAL/00008 A 4 beam balance with a suspended pan. Weighing capacity 311g.Sensitivity 0.01g. Height of stirrup approx 190mm. Beams notched. Four beams each provided with a slider, and graduated 0-200g x 100g, 0-100g x 10g, 0-10g x 1 g … Click Here And Read Rest Below

  • ELECTRONIC BALANCE

    ELECTRONIC BALANCE

    Cat No. VE/BAL/00007 Features: Auto shut off. Auto calibration. Auto zero tracking. Auto backlight. Low battery indication. Kg/g/oz conversion. Large LCD (6 digits 15mm height). Large Square weighing pan. Net weight/stability indication. 1/2000, 1/5000 & 1/15000 division available. Cat. No. … Click Here And Read Rest Below

OSCILLOSCOPE
POROUS POT
OSCILLOSCOPE

CAT. No. VE/PHY/00024

OSCILLOSCOPE, Dual Trace, 20 mhZ
* DC to 20 MHz,dual beam
* 2mV per cm sensitivity
A high performance oscilloscope with wide vertical bandwidth and time-base speed range.
Specifications :
Operating mode : Ch I, Ch II, Ch I & II Alternated / chopped
Vertical Deflection : DC – 20 MHz (-3 dB)
(identical channels) DC – 28 MHz (-6 dB)
Deflection Coefficients : Twelve calibrated steps 2 mV to 10V/cm
Input Impedance : 1 Mohm//25 pf
Input coupling : DC-AC-GD
Max Input Voltage : 500 V (d.c.+ peak a.c.)
Time Base : 18 calibrated steps 0.5 µs/cm to 0.2s/cm,with magnifier x5 to 100 ns/cm with variable control to 40 ns/cm
Accuracy : ±3%
Trigger System :
Modes : Automatic or variable trigger level
Source : Channel I or II or external
Slope ; Positive or negative
Coupling : a.c., TV frame
Horizontal Deflection :
Bandwidth : DC 2.3 MHz
Deflection co-efficient : 12 calibrated steps 2mV/cm to 10V/cm
Input impedence : 1 M//25 pf
Built-in single touch component tester :
Test voltage : Max.8.6 V rms (open)
Test Current : Max 28 mA rms (shorted)
Test frequency : 50 Hz
Display : 8 x 10 cm
Trace rotation : Adjustable on front panel
Calibrator : Square wave 1 KHz approx 0.2V ±1%
Mains Voltage : 220-240 V 50, Hz (switch at the back)
Mains fluctuation : ±10%
Included accessories :
1 BNC-BNC cable
1 BNC-crocodile clip cable
1 pair Test probe
1 Manual

  1. Product Query

Coporate Offices