• TRIPLE BEAM BALANCE

    TRIPLE BEAM BALANCE

    Cat No. VE/BLA/00010 A A single pan, low from beam that will weigh upto 2610 gm when used with supplementary masses. The balance has three notched weighing beams with center indicating sliding masses, giving total weighing capacity of 610gm. Additional … Click Here And Read Rest Below

  • TRIPLE BEAM BALANCE

    TRIPLE BEAM BALANCE

    Cat No. VE/BLA/00010 A single pan, low from beam that will weigh upto 2610 gm when used with supplementary masses. The balance has three notched weighing beams with center indicating sliding masses, giving total weighing capacity of 610gm. Additional masses … Click Here And Read Rest Below

  • LEVER (LETTER) BALANCE

    LEVER (LETTER) BALANCE

    Cat No.VE/BAL/00009 The balance frame is of aluminium casting having three point base with a leveling screws.The dual range are scale 0-250 gms x 1gm division and 0-1 Kg x 10gms. With removable pan. The changeover is effected by a … Click Here And Read Rest Below

  • FOUR BEAM (SUSPENDED PAN) BALANCE

    FOUR BEAM (SUSPENDED PAN) BALANCE

    Cat No.VE/BAL/00008 A 4 beam balance with a suspended pan. Weighing capacity 311g.Sensitivity 0.01g. Height of stirrup approx 190mm. Beams notched. Four beams each provided with a slider, and graduated 0-200g x 100g, 0-100g x 10g, 0-10g x 1 g … Click Here And Read Rest Below

  • ELECTRONIC BALANCE

    ELECTRONIC BALANCE

    Cat No. VE/BAL/00007 Features: Auto shut off. Auto calibration. Auto zero tracking. Auto backlight. Low battery indication. Kg/g/oz conversion. Large LCD (6 digits 15mm height). Large Square weighing pan. Net weight/stability indication. 1/2000, 1/5000 & 1/15000 division available. Cat. No. … Click Here And Read Rest Below

LEVER KIT
LEVER KIT

CAT. No. VE/PHY/00139

To provide a simple ‘See-Saw’ for experiments on balancing masses, leading to the principle of the lever. Also to show that there is no net change in energy in the moving masses.
Comprises 5 wood beams, approximately 610 x 44 mm graduated at 38 mm intervals, 4 “U” shaped supports, grooved to locate fulcrum pins, 40 brass ‘penny weights’, 25 x 25 x 2 mm and 20 fulcrum pins for insertion into edge of beam.

  1. Product Query

Coporate Offices