• TRIPLE BEAM BALANCE

    TRIPLE BEAM BALANCE

    Cat No. VE/BLA/00010 A A single pan, low from beam that will weigh upto 2610 gm when used with supplementary masses. The balance has three notched weighing beams with center indicating sliding masses, giving total weighing capacity of 610gm. Additional … Click Here And Read Rest Below

  • TRIPLE BEAM BALANCE

    TRIPLE BEAM BALANCE

    Cat No. VE/BLA/00010 A single pan, low from beam that will weigh upto 2610 gm when used with supplementary masses. The balance has three notched weighing beams with center indicating sliding masses, giving total weighing capacity of 610gm. Additional masses … Click Here And Read Rest Below

  • LEVER (LETTER) BALANCE

    LEVER (LETTER) BALANCE

    Cat No.VE/BAL/00009 The balance frame is of aluminium casting having three point base with a leveling screws.The dual range are scale 0-250 gms x 1gm division and 0-1 Kg x 10gms. With removable pan. The changeover is effected by a … Click Here And Read Rest Below

  • FOUR BEAM (SUSPENDED PAN) BALANCE

    FOUR BEAM (SUSPENDED PAN) BALANCE

    Cat No.VE/BAL/00008 A 4 beam balance with a suspended pan. Weighing capacity 311g.Sensitivity 0.01g. Height of stirrup approx 190mm. Beams notched. Four beams each provided with a slider, and graduated 0-200g x 100g, 0-100g x 10g, 0-10g x 1 g … Click Here And Read Rest Below

  • ELECTRONIC BALANCE

    ELECTRONIC BALANCE

    Cat No. VE/BAL/00007 Features: Auto shut off. Auto calibration. Auto zero tracking. Auto backlight. Low battery indication. Kg/g/oz conversion. Large LCD (6 digits 15mm height). Large Square weighing pan. Net weight/stability indication. 1/2000, 1/5000 & 1/15000 division available. Cat. No. … Click Here And Read Rest Below

INDUCTION COIL
INDUCTION COIL
INDUCTION COIL
CAT. No. VE/PHY/00115

VE/PHY/00115 A

Induction Coil: The primaries are wound with thicker copper enamelled covered wire on letherite pipe in two layers. The secondary coils are divided into two parts & are given heavy insulation. Each layer is wound in a cover of butter paper & are completing the winding, the entire is dipped into hot wax to seal each layer against moisture effect. The coils are housed in a teakwood base, voltage tested condensers are fitted inside the wooden polished base. Handles to get the spark are fitted on it & make or break points are of silver. One point is adjustable to get any cycle. On/off reversing switch commutator working on 6 to 12 V DC. Spark in air:

 

Type

A

B

C

D

E

Size

10 mm

25 mm

50 mm

75 mm

100mm

 VE/PHY/00115 B

Dissectible Induction Coil: Most suitable for demonstration. Secondary coil & capacitor can be easily separated out. With arrangements for disconnecting & capacitor, while in operation. All connections clearly visible. Spark length 25 mm.

  1. Product Query

Coporate Offices