TRIPLE BEAM BALANCE
Cat No. VE/BLA/00010 A A single pan, low from beam that will weigh upto 2610 gm when used with supplementary masses. The balance has three notched weighing beams with center indicating sliding masses, giving total weighing capacity of 610gm. Additional … Click Here And Read Rest Below
TRIPLE BEAM BALANCE
Cat No. VE/BLA/00010 A single pan, low from beam that will weigh upto 2610 gm when used with supplementary masses. The balance has three notched weighing beams with center indicating sliding masses, giving total weighing capacity of 610gm. Additional masses … Click Here And Read Rest Below
LEVER (LETTER) BALANCE
Cat No.VE/BAL/00009 The balance frame is of aluminium casting having three point base with a leveling screws.The dual range are scale 0-250 gms x 1gm division and 0-1 Kg x 10gms. With removable pan. The changeover is effected by a … Click Here And Read Rest Below
FOUR BEAM (SUSPENDED PAN) BALANCE
Cat No.VE/BAL/00008 A 4 beam balance with a suspended pan. Weighing capacity 311g.Sensitivity 0.01g. Height of stirrup approx 190mm. Beams notched. Four beams each provided with a slider, and graduated 0-200g x 100g, 0-100g x 10g, 0-10g x 1 g … Click Here And Read Rest Below
Cat No. VE/BAL/00007 Features: Auto shut off. Auto calibration. Auto zero tracking. Auto backlight. Low battery indication. Kg/g/oz conversion. Large LCD (6 digits 15mm height). Large Square weighing pan. Net weight/stability indication. 1/2000, 1/5000 & 1/15000 division available. Cat. No. … Click Here And Read Rest Below
CAT. No.VE/PHY/00134 A
Inclined Plane, Simple and Friction Board: A planed board, 600 x 75 mm, hinged to the base at one end and provided with a pulley for the force cord at the other. A movable block enables the inclination of the plane to be varied. The friction slide, 100 x 65 mm is reversible and has one side cut away for half its area. Complete with brass roller 75 x 25 mm diameter. Without masses or scale pan.
CAT. No. VE/PHY/000134 B
For experiments on sliding friction. Comprises inclined wood plane, 600 x 100 x 20 mm, with 22 mm diameter pulley, hinged to wood base, 450 x 100 x 20 mm. Linear scale fixed to edge of plane and vertical linear and 0 to 45° angular scales fixed to base with clamp, shaped for use as index. With one each wood blocks, 200 x 75 mm and 100 x 75 mm, steel block 100 x 75 mm, scale pan 75 mm diameter, cord and hooks.
CAT. NO. VE/PHY/000134 C
The apparatus comprises two wood strips mounted on a heavy cast-iron base, friction reducing surface covers the inclined plane. An adjusting clamp and 50 mm diameter pulley are provided at the top of the incline and a linear scale is fixed to the side. A 0 to 45° angular scale is screwed to the base.
Dimensions : Overall length without pulley 550 mm approximately, width 150 mm.