TRIPLE BEAM BALANCE
Cat No. VE/BLA/00010 A A single pan, low from beam that will weigh upto 2610 gm when used with supplementary masses. The balance has three notched weighing beams with center indicating sliding masses, giving total weighing capacity of 610gm. Additional … Click Here And Read Rest Below
TRIPLE BEAM BALANCE
Cat No. VE/BLA/00010 A single pan, low from beam that will weigh upto 2610 gm when used with supplementary masses. The balance has three notched weighing beams with center indicating sliding masses, giving total weighing capacity of 610gm. Additional masses … Click Here And Read Rest Below
LEVER (LETTER) BALANCE
Cat No.VE/BAL/00009 The balance frame is of aluminium casting having three point base with a leveling screws.The dual range are scale 0-250 gms x 1gm division and 0-1 Kg x 10gms. With removable pan. The changeover is effected by a … Click Here And Read Rest Below
FOUR BEAM (SUSPENDED PAN) BALANCE
Cat No.VE/BAL/00008 A 4 beam balance with a suspended pan. Weighing capacity 311g.Sensitivity 0.01g. Height of stirrup approx 190mm. Beams notched. Four beams each provided with a slider, and graduated 0-200g x 100g, 0-100g x 10g, 0-10g x 1 g … Click Here And Read Rest Below
Cat No. VE/BAL/00007 Features: Auto shut off. Auto calibration. Auto zero tracking. Auto backlight. Low battery indication. Kg/g/oz conversion. Large LCD (6 digits 15mm height). Large Square weighing pan. Net weight/stability indication. 1/2000, 1/5000 & 1/15000 division available. Cat. No. … Click Here And Read Rest Below
Eliminates entirely all fractional weights and thereby speeds up weighings. Specially suitable for industrial and Technical Laboratories.
A gold chain is suspended from the beam with its other end screwed on a rotating drum on which a scale is graduated from 0 to 110 divisions, each division representing 1 mg. By the movement of this scale before a vernier reading upto 1/10 mg. is taken.
Air Damping Arrangement: It is specially provided to make the oscillation periodic and rapid.
Beam: Flexure freebridge type beam without graduation. Made of special alloy.
Stand: All brass including capot and base.
Arrestment: Circular type to give longer life to knife edges
Knife Edges and planes: Finest agate, accurately ground.
Pan: Chromium plated, slightly concave inwards.
Case: Highly polished, well seasoned teak wood case.
Base: Synthetic black board.
Length of beam: 14cm
Height of stand: 26.5cm
Height of Long suspension: 21cm
Pan Diameter: 7.5 cm